How to Achieve Maximum Success with Equipment

Why Most Industries Still Use Rivet Fasteners?

There are now several fasteners for metals available, but rivet is considered to be the oldest form. This has been introduced during the two World Wars that is used to construct airplanes and boats. Surprisingly, this is still used up to this modern days.

Hot rivets are used in order to put together metals in building ships, bridges ad other iron structures. The rivet is heated until it turn to red hot and put into the hole joining two pieces of steel or iron together. There are two persons who need to do the process and one man should hold the rivet in the right place while the other one on the other end and hit it to blind the rivet over the hole. The metal will join even tighter together as the rivet cools down.

However, this process is dangerous because it requires heat and hammering. Getting the hot rivets is very complicated. One of the best example for this is way back 1920’s when skyscrapers were built in New York. It is never easy to get the hot rivets that high.

However, things have changed today since rivets used are already cold rivets which size is relatively small than the old rivets. This is due to the fact that ships welded the steel hulls together for faster and stronger construction. When it comes to bridges, they are bolted together using fasteners.

Cold rivets are a more modern type which can be utilized by someone who is doing a DIY project. Visit your nearest DIY store and you will sure find a pop riveting kit. Pop rivets are the placed in the hole and a moderate pressure will let them tighten itself. Since there are usually excess parts of the rivet, it can be crop off with the help of the riveting gun.

The aircraft industry has so much respect for rivets that they are still using them until this modern days. For several years already, rivets have been a very useful tool to fasten and hold pieces together.

All of these just show how rivets are able to withstand the test of time.

For different times, rivets tools have been a good choice when it comes to fixing and holding things together. Using this fastener is a good alternative when welding doesn’t work. For example, you need to join plywood and metal sheets, rivets can sure work good for this. These can hold better materials which can be easily modified or deformed. Depending on where to use it, there are several sizes to choose from.

Since rivets are known to be strong, they are used in different industries and for different purposes all over the world. Due to this high demand, there are already several manufacturers from the different parts of the world. These fasteners are designed to be more strong, accessible and cost-effective.

Recommended reference: article